Smartlinq Specifications
Technical Specifications
General
Dimension (mm – H/W/D) : 86 x 46 x 16.8 mm
Weight (g): 72 g
Hardware
GPS baseband: SIRF GSC3F
GSM band: Quad band GSM 850/900/1800/1900
Receiver: 20 x 11 mm
Speaker: 20 x 11 mm
Indicator LED: x3
- Charge LED
- GSM status indicator LED
- GPS status indicator LED
Keyboard backlight: LED – Navy blue
Vibrate mode: Yes
GSM Antenna: Internal antenna
GPS Antenna: Internal antenna
Memory: 32M bits FLASH + 16M bits RAM
System interface: Proprietary
Earphone interface: 2.5 mm jack
RF Test Interface: For use by mobile network operators for FR network testing.
Temperature: Normal working conditions: -10 to 55 C
Limited working conditions: 55 to 65 C
Software
Ring tone: 16 channel polyphonic MIDI for incoming calls
Voice codec: FR, EFR, HR, AMR
Two path audio: Earphone and Receiver
GPS :
- SiRF Star III chipset
- Receive 20 channels, L1 1575.42 MHz, C/A code 1.023 MHz chip rate
- DGPS accuracy 1 to 5m, typical 0.05m/s
- Acquisition rate (TTFF defined at 95% of first position local station)
Standard GPS mode:
- Hot start <1 second, average in open sky
- Warm start <38 second, average in open sky
- Cold start <42 second, average in open sky
OTA: Over the air command settings from the SafeLinQ server using the SafeLinQ proprietary protocol.
Motion sensor: Sends out alert information when activated and shock is detected.
Speed sensor: Sends out alert information when activated ans speed threshold is met.
